Tools:
Level
Phillips screwdriver
Torx Bit or driver, size no. T-25
Finishing nails to attach jamb extensions
Drill
3/32” Drill bit to pre-drill jamb corners
13/64” Drill bit to pre-drill rough framing
Shimming wedges (cedar shims)
Hammer

Standard Door Parts (included):
Door slab, with lockset and hinges pre-installed (A)
See diagram 3.
Jamb Package (includes hinge side jamb, strike-plate
side jamb and header jamb). (B)
See diagram 2.
Jamb extension package (C)
See diagram 4.

Hardware Box:
4 small screws, each 2” (D)
8 large jamb screws (shank screws) (E)

8 lacquered pine plugs (F)
1 lever handle set (G)
1 keyhole cover (escutcheon) (H)