Before you begin:

PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION.

1) Home Tech doors may be hung to swing to the left or the right; in or out.
• See section A-2.

2) WHEN CUTTING, MEASURE TWICE, CUT ONCE.

3) Home Tech doors usually have an approximate 3/4” gap between the bottom of the door and the floor. In normal installation, cutting is not required.
• To increase the space below the door, measure and trim up to 1” from the bottom of the door.
• To decrease the space, measure and trim up to 1/2” from the bottom of the jambs.
• Sand all trimmed surfaces and apply two coats of lacquer.